Bosch Router Table

Add the Mast-R-Lift to your router table and take your fixed base router to another level, literally! Bit changes are convenient because the collet is accessible above the table. The Mast-R-Lift was designed for the most popular router motor on the market the Porter-Cable 7518 (3.5" diameter motors will fit with an appropriate adapter, sold separately). Each turn of the crank precisely raises the bit 1/16". The calibrated gauge makes it easy to make incremental adjustments as fine as 1/512" (less than 0.002"). The Mast-R-Lift is constructed of the highest quality components including a plate machined from 1" aluminum with a 3-1/2" opening that accepts the included phenolic insert to close the hole to 2" for smaller bits. Unique leveling bars are located at each corner to bring the plate flush with your router table surface. The medium plate is sized for 9-1/4" x 11-3/4" openings found on JessEm, Woodhaven, Woodpeckers, and many other router tables. The small plate is sized for 8-1/4" x 11-3/4" openings found on Bench Dog router tables. Includes an insert wrench, starting pin, and detailed instructions. Router motor is not included. Mast-R-Lift adapters allow you to use your 3-1/2" diameter motor (Porter-Cable 690, DeWalt 610, Bosch 1617, 1618, 1617EVS and 1618EVS) in the Mast-R-Lift clamp block. PC 7518 3-1/4 HP Motor. Spare the expense of the base and purchase only the motor of a Porter Cable 7518 Router. Includes 1/2" collet and wrenches.

Amazon Sales Rank: #81843 in Home Improvement Brand: JessEm Model: 02101 Dimensions: 9.50" h x 13.50" w x 16.50" l, Allows height adjustment and bit changes from above the table 9-1/4- by 11-3/4-inch insert plate size for JessEm router tables Built in plate leveling and insert adjusters for a perfect fit Includes a 1-1/2-inch insert ring with wrench, starting pin, and hex wrench Insert plate is machined with a 3-5/8-inch diameter TAB-LOC centerhole; 1-year limited warranty

Beautifully finished with red and black anodized components, the JessEm 02101 Mast-R-Lift is the sequel to JessEm's original ROUT-R-LIFT. Precision machined from premium 6061 aluminum, this is the top of the line for JessEm's lift systems. Designed for cabinetmakers, furniture makers and other custom woodworking pro's, the MAST-R-LIFT is built for long-term professional use. The design has been streamlined and performance has been enhanced with a full 3-3/4-inches of vertical travel. The insert plate is precision-machined from a solid 1-inch thick aluminum blank. Our new speed crank design offers a tall handle for clearing the top of the fence while making adjustments. Designed specifically for the Porter Cable 7518 and to fit similar cylindrical motor housings with the use of a reducer collar. The insert plate centerhole is machined to accept up to a 3-1/2-inch raised panel bit and includes a 1-1/2-inch insert ring. Additional insert ring sets are available separately. (9 1/4-Inch x 11 3/4-Inch)

Most helpful customer reviews 7 of 7 people found the following review helpful. Incredibly well made, very functional By J. Dubovsky I've used this router lift for a mix of wood-working jobs and haven't found much wrong with it. It's very well-made, the adjustments are solid but not too tight, and the height adjustment is quite repeatable. I like the fact that the included manual describes what you may need to do as the years go by; for example, they describe replacing the felt chip brushes on the shafts, knowing that you'll be using this thing for 10+ years. 8 of 9 people found the following review helpful. Very pleased By Rickey Lodico It took me all of 15 minutes to read the directions, remove the motor from my PC7518, install it in the Mast-R-Lift and have it ready for use in the router table. I couldn't ask for anything easier and it operates soooo smoothly too. 4 of 4 people found the following review helpful. Awesome Lift! By Tile Carpet Etc I had a little difficult time inserting my Milwakee router with the sleeve but eventually got it. I have used it extensively and having the ability to change the bit above the table is a luxury! I LOVE it! It's smooth and cranks nice and even both up and down. It is a little pricey but I know I won't have to buy another one, but I wouldn't mind having 1 or 2 more. I strongly advise anyone to invest in this quality tool rather than a cheaper one that you'll need to replace at least once. 5 Stars ***** See all 9 customer reviews...