Bosch Router Table

Freud RTS5000 Precision Router Table System The Freud RTS5000 Router Table and Fence Combo Package makes it easy to set up to a professional router table system. The 31.5 x 23.5 x 1 table top, constructed of high pressure laminate with MDF core, provides stability for large projects and it's 3/4 aluminum T-track accepts standard miter gauges and accessories. The large 9 x 12 Router Insert Plate has snap-in reduction rings and a starter pin. Quick and Easy to set up Large table top provides stability for large projects The 3/4 aluminum T-track accepts standard miter gauges and accessories The router insert plate has snap-in reduction rings and a starter pin New SH-5 Premium Router Table Fence System with micro-adjustability for precise positioning of the in-feed and out-feed fences with built-in dust collection port 60 days warranty on fence,

Amazon Sales Rank: #123420 in Home Improvement Brand: Freud Model: RTS5000 SH-5 micro adjustable fence to .001-Inch; includes dust collection port, MDF fence faces, chip guard, and mounting screws Premium 9-by-12 aluminum insert plate that won't sag under heavy weight router; precision machined for flatness and an 8-point leveling system for a flush fit; comes with two snap down rings and starter pin Sturdy 16-gauge steel stand; height adjusts from 32- to 38-Inch and comes with rubber leveling-Feet Large 31-1/2-by-23-1/2-by-1-Inch high pressure laminated MDF core table top 60 days warranty on fence, table top, and legs

Freud's new RTS5000 Stationary Router Table is easy to set up. For one price you receive a professional, precision router table system. Includes Freud's SH-5 router table fence micro-adjustable to .001 inch. Precise positioning of the in-feed and out-feed fences and built in dust collection port. Large 31 1/2 inch x 23 1/2 x 1 inch table constructed of high pressure laminate with MDF core and 3/4 inch aluminum t-track. 9 x 12 aluminum insert plate that won't sag under weight of heavy routers. Plate is precision machined for flatness and has eight point leveling system for flush fit. Plate comes with 2 snap down rings and starter pin. Sturdy 16 gauge steel stand can be adjusted from 32 to 38 inches in height and comes with rubber leveling feet.

Most helpful customer reviews 4 of 4 people found the following review helpful. Insert Plate By M. Weant The insert plate would not seat deep enough in the table to allow the plate to be flush with the top of the table. Leveling screws could not be lowered enough. Carried the table top to the nearest Freud Service Center and had table top replaced. Could not replace the insert plate since it was drilled for a different router than Freud. Still did not level exactly. Was able to slightly counter sink the top of the screw inserts and was able to completely level the insert plate. The personnel at the service center were very friendly and helpful. A comment for manufacturing is that the area routed out for the insert plate should be set a little deeper to allow more adjustment for the screws. 1 of 1 people found the following review helpful. Hardware and what they don't tell you. By Innkeeper 06 The hardware that was shipped was not what was called for in the instructions. The instructions call for carriage bolts and lock washers. A less than satisfactory replacement hardware was substituted. The Instructions appeared to be interpreted from another language and was difficult to follow, I have a masters degree and it was difficult for me. The cd that accompanied the product was crushed and the Seller is reluctant to replace. The aluminum insert is not predrilled to accept anything except a Freud router, So if I was to buy this again I would go ahead and buy the Freud router to go along with it. Overall I am happy with it but these few little pitfalls are annoying when you think you are buying top end equipment. 1 of 1 people found the following review helpful. Freud Router Table By Clayton T. Whisman All-in-all this is a pretty good router table for the money. I did not experience the plate leveling problem another reviewer talked about. Mine was about 1/4" below the table surface before I raised it with the leveling screws. I did however run into an issue with the substandard hardware included to assemble the table. A lot of the nuts had burs in their threads making them difficult to start at times. Virtually all of the nuts had the thread hole drilled off center, not that this hurt anything, but just shows how cheaply made they are. It would have been nice if the table top had been pre-drilled for attachment to the stand, but it wasn't, so you will have to spend some time centering the stand to the top and marking the hole locations. The stand does not come with any remote power switch for your router so you will need to purchase one or reach under the table everytime you need to turn the router on or off (or plug and unplug the router cord from the wall). On the plus side the stand is sturdy once assembled and has a nice powder-coat finish. I absolutley love the micro-adjust fence (although they could have made the fence a bit higher and longer, but it is easy to make your own fence and attach it to the micro-adjust hardware). See all 6 customer reviews...